for the production of mixtures according to EN 196-1, ISO 679, DIN 1164, ASTM C 305, Ö-Norm B 3310 and other standards
Art. no. B2780
Technical Data:
Model also available as ASTM-version.
for the automatic production of mixtures in accordance with EN 196-1, EN 480, EN 196-3 and other standards
Art. no. B2781
Technical Data:
Delivery includes:
Art. no. B2782
as Order-No. B2781, but additionally with:
Both models also available as ASTM version.
Art. no. B270925
Art. no. B2709222
as above, but:
Art. no. B2715
Art.no. B2709
Art.no. B270940
• made of white special plastic (Hakorit)
• very low-wear
• stiffned against bending and unbreakable
• self-lubricated
• easy cleaning because no cement or mortar adheres
• no rust possible
• no much time necessary for cleaning
• temperature for use max. +80°C
• temperature for use min. -30°C
• for simultaneous production of 3 test specimens
• dimensions: 40 x 40 x 160 mm
Art.no. B270942
• made of white special plastic (Hakorit)
• very low-wear
• stiffned against bending and unbreakable
• self-lubricated
• easy cleaning because no cement or mortar adheres
• no rust possible
• no much time necessary for cleaning
• temperature for use max. +80°C
• temperature for use min. -30°C
• for simultaneous production of 6 test specimens
• dimensions: 40 x 40 x 160 mm
Art.no. B2808
For compaction of cement and other binding agents
acc. to EN 196-1, EN 12808-3, EN 459, DIN 18555-3
Art. no. B2830
according to DIN EN 196 Part 1 (Issue may '95) as well as ISO 679
The machine comprises a table which is rigidly connected by two arms with an axle 800 mm away from the middle of the table and placed on a rotating cam plate with a revolving rate of 60 revs./min.
Projection and strokes correspond to a pyramid hardness of at least 500 HV.
The entire mass of the table incl. the arms, an empty triple form (Art. no. B270922), top box and clips is 20 kg +/- 0,5
The appliance is supplied with power connection, automatic counter, start and stop key and automatic switch-off when the test ends.